推荐资讯
- 闸板式闸门制造 10-23
- 钢制闸门在水利渠道闸门怎么安装? 10-23
- 电动水利铸铁闸门厂家 08-28
- 铸铁闸门厂家在哪里-铸铁圆形闸门生产厂家有哪些-贵州铸铁钢制闸门厂家 08-28
- 双向铸铁闸门厂家 06-08
- 厂家直销铸铁闸门 06-08
- 平面钢制液压闸门-液压钢坝生产厂家电话 05-15
- 钢制闸门-钢坝-液压翻板景观闸门生产厂家 05-15
- 翻板闸门 04-16
- 电液动平板闸门 04-16
- 钢制闸门图片-钢板闸门-山东钢坝液压闸门生产厂家 03-24
- 平板钢制闸门 05-28
- 闸门-铸铁闸门-钢制闸门-型号-江苏不锈钢闸门厂家 05-28
- 水渠闸门-水渠铸铁闸门生产厂家 05-05
- 闸门止水带安装图片 05-05
联系我们
- 编辑 : 河北专业水利闸门,电动闸门,辽宁、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、山西、四川平面不锈钢闸门,铸铁闸门,钢制闸门,钢闸门,铸铁拍门,钢制拍门,玻璃钢拍门生产厂家哪家好 时间: 2018-12-18 10:04 浏览量: 192
-
新疆钢闸门装置与环境温度的要求,装置时一定要坚持根底布置立体程度180°,启闭机底座与根底布置立体的接触面积要到达90%以上,螺杆轴线要垂直于闸台上横梁的程度面,要与闸板吊耳孔吻合垂直,防止螺杆倾斜,形成部分受力而损坏机件。
手电两用启闭机构造由机壳、机盖、支架、螺母、螺杆、压力轴承、螺杆、蜗杆、蜗轮手摇柄、电机、电器等组成。手电两用启闭机采用蜗轮,蜗杆变速螺母旋转,使螺杆上下运动,平安功能高,手电两用启闭机具有扭矩维护和行程限位双重防护措施,操作方便,可完成遥控和现场操作,单台控制和集中控制等多种控制方式。
在载荷运转一段工夫后,要停止颐养,把机内新机件磨擦发生的金属沫特别是螺杆、螺母、涡轮、涡杆,要轻洗洁净,涂上光滑油,密封严实,持续运用。The requirement of Xinjiang steel gate device and environmental temperature must insist on the stereoscopic degree of the base arrangement 180 degrees, the contact area between the base of hoist and the stereoscopic arrangement of the base should reach more than 90%, the screw axis should be perpendicular to the degree plane of the cross beam on the gate platform, and should be in accordance with the vertical of the gate hanger ear hole, so as to prevent the screw from tilting and forming part of the mechanical force to damage the machine parts. The utility model is composed of a housing, a cover, a bracket, a nut, a screw, a pressure bearing, a screw, a worm, a worm wheel handle, a motor, an electric appliance, etc. The dual-purpose hoist adopts worm wheel and worm variable speed nut to rotate, which makes the screw move up and down. It has high safety function. The dual-purpose hoist has dual protective measures of torque maintenance and travel limit. It is easy to operate and can complete remote control and field operation, single control and centralized control. After the load runs for a period of time, it is necessary to stop taking care of itself. The metal foam, especially the screw, nut, turbine and scroll, which occurs when the new parts of the machine are friction, should be cleaned and cleaned lightly, coated with smooth oil, sealed tightly and used continuously.